200

200 series level switches  are low cost, small static electronic devices switching the internal relay according to the level of water. The relay is on, in presence of water; its contact is N.O. - 5 A - 220 V a.c. (resistive load). The device sensitivity is according to the model, and is adjustable by means of  internal trimmer, allowing working with different conductivity liquids. No electrolysis phenomena appears on the electrodes. The device is plug-in type, for easy mounting and service.

201

201 series level switches are low cost, small static electronic devices switching the internal relay according to the level of water. The relay is on, in presence of water; its contact is N.O. - 5 A - 220 V a.c. (resistive load). The device sensitivity is according to the model, and is adjustable by means of  internal trimmer, allowing working with different conductivity liquids. The delay of the switch (to on or to off, according to the model), is adjustable by means of  internal trimmer, from 0.5" to 12". No electrolysis phenomena appears on the electrodes. The device is plug-in type, for easy mounting and service.

320

600

   Food industry, single probe

Series 600 probes are useful in food and chemical industry when the application requires a single level electrode. The insulating material is teflon (PTFE) and the threaded connection is 1/2" - AISI 304 stainless steel (or AISI 316). The particular probe shape does not allow fouling or deposit of the product to be measured.  The probes are supplyed with a 480mm or 980mm long electrode, already mounted.  Electric wiring is according to DIN 43650-A.

700

  Food industry, multiple probe

390

Series 390   electrode holders are useful when the application requires a single level electrode. The insulating material is teflon ( PTFE ) food compliant, and the threaded connection is 1/2"or 3/8" - AISI 304 stainless steel. Probes withstand pressure up to 18 bar, and temperature up to 180°C.

395

Series 395 single electrode-holders and probe are particularly suitable in applications where high pressure up to 25 bar, and high temperature up to 250^°C are normal operating conditions.
Common applications are: boilers, and heating plants.
The thread is 3/8"  stainless steel body; the  insulating material is special ceramics (Al₂O₃).

677

677 series level switches are compact and rugged sensors that may control (ON/OFF) level of solid and liquid products, in food and chemical industry.
The electronics of the switch is integrated with the probe body, always in stainless steel, for immediate field mounting and installation, without expensive electric wiring, according to DIN 43650-A. The standard sensitive element is a stainless steel 250 mm long antenna, covered by food compliant PTFE.

420

  Theshold switch for 440 transmitter

210
211
800

999

Threaded locking rings for welding allow easy mounting and service of  395 series   probes.
The o-ring seal make the probe water proof, and does not allow fouling or deposit of material to be measured between the threads.

999

999